55KW Split Case Centrifugal Pump

Vacuum Prime Assistant Diesel Engine Horiontal Split Case Dewatering Centrifugal Water Pump

We are professional manufacturer for Horizontal Split Case Pump, Double Suction Pump with high and stable quality, and we have made many water pump solutions for many customers.

General Description:
Tpye S Split Case Pump/Double suction pump is new type of single stage double suction split case centrifugal pump with high pefformance. They are widely used in delivering liquids to the water plant, circulation water system of airconditioner, pipe net syetem of supplying heated water, construction, drainage
Pumping station, power station, industrial water supply system, ship industry, mine and etc. Type S split case pump is advanced products developed from type  S. SA.  pumps.

Split Case pump, The technical parameter of pumps:

Speed: 990, 1480 and 2960 r/min
Voltage: 380, 6K/10KV
Inlet and Outlet: 150~600mm
Flow range: 68~3975m3/h
Head range: 6~180m
Fuel: Diesel
Engine: DEUTZ engine, water cooled

Temperature range: Maximum temperature ≤ 100 ° C of the liquid, a special configuration of up to 150 ° C, ambient temperature ≤ 40 ° C
Maximum working pressure (inlet pressure pump pressure +): 1.0MPa (Hsp ≤ 75m) or 1.6MPa (Hsp>75m)
Special configurations can be respectively 1.6MPa or 2.5Mpa
Allows transportation media: Clearwater physicochemical properties similar to the branch water or other liquids
Sealed pipe parts: Inlet pressure ≥ 0.03 Mpa without installation

TECHNICAL ADVANTAGE
1. Type S pumps work stably with less noise and vibration and can work at a lifting speed due to. Short Support at both sides, thus they can be widely used.
2. The pipelines arrangement of type S pump looks simple and beautiful due to inlet and outlet at a Same center line.
3. The same rotor of type S pumps can be operated at reverse direction to avoid damage to the pumps By water hammer.
4. Unique design of type S pumps working at high temperature using middle support to fasten the Pump casing and using cooling seals oil lubrication bearing then pump suitable for working at 200 degree Especially for suppling heated water to pipe net system.
5. Type XS pump casting parts can be vertically or horizontally mounted acoording to different working Condition, with mechanical seals or packing seals.
6. Type XS pumps look beautiful with visible lines adopting industrially designing.

COST ADVANTAGE:
1. The efficiency of S pumps are 2%~3% higher than the same type pumps due to adopting advanced Hydraulic model and thus minimum the operating costs.
2. The NPSH of type S pumps are 1-3 meters lower than the same type split pumps due to using Advanced hydraulic model and advanced manufacturing technique and thus minimize the foundation costs And extendling the using life.
3. Type S pumps are suitable for any site working condition due to using SKF NSK bearing and other Parts chosen by the customers and thus minimize the maintenance costs.
MAINTENANCE ADVANTAGE:
1. It is very easy and simple to replace the mechanical seal due to usine container type machaniacl seal.
2. It is rapid easy to assembly and dismout the rotor parts due to using elastic ripess assembling.
3. It is unnecessary to make adjustment when assembling

Application:
S series Split Case Pump is widely used for water plant, irrigation, drainage pumping station, power station, water circulation of air-conditioning, industrial water supply system, fire system and shipping industry as well as for the general purpose in the oil refining industry.

a) Waterworks
b) Circulation water for air-condition
c) Water supply for industry and building
d) Irrigation and drainage pumping station
e) Power station
f) Fire fighting